Skip to main content Skip to secondary navigation
Check it out

SUMS Weekly Office Hours

Have a question about a potential mass spec project?
Not sure exactly who to talk with at SUMS?

Drop in to our open virtual Zoom office on Thursday afternoons between 4:00 and 4:30 pm Pacific Time and get answers!

 

Sample Preparation

Main content start

Instructions on sample preperation

 

Proteins in polyacrylamide gel

  • Samples for protein identification by proteolytic digestion and LC-MS/MS are commonly submitted as Coomassie stained bands or spots in polyacrylamide gels.
  • The gels should be handled as little as possible, to minimize contamination by dust and keratin.
  • Destain Comassie stained gels by soaking for at least 2 hours in 10% acetic acid, 50% methanol, and 40% H2O with at least two changes of this solvent. If the gel still has a Coomassie Blue background then continue destaining until the background is nearly clear.
  • Sypro Ruby and other fluorescent stained gels should not require an additional destaining step.
  • After destaining, soak in pure water until pH is neutral.
  • The spot or band of interest should be excised cleanly, excluding all of the surrounding blank gel; the goal is to maximize the ratio of protein to gel.
  • The maximum size of a gel band should be 1.5 cm. Cut the excised gel into small pieces (1-2 mm square) and place in a clean eppendorf vial with a 1% acetic acid solution.
  • Wet samples should be shipped on dry ice. Dry gel pieces may be shipped at room temperature. 
  • In-Gel Protocol

Proteins in solution

  • Solution samples of proteins for identification will be treated with 8M urea to denature the protein before reduction and alkylation.
  • Samples should be shipped on dry ice.
  • Non acceptable buffers inlude NP40, CHAPS, Triton X, and PEG. If SDS is to be used, please contact the lab. 
  • In-Solution Protocol

Protein-related projects: MudPIT, de novo sequencing

Please contact SUMS to discuss sample prep and strategy for more complex projects such as MudPIT, peptide mapping, de novo peptide sequencing, and protein folding.

Included with a protein ID analysis:

  • In-gel digestion with Trypsin/Lys-C (cuts after lysine and arginine)
  • LC-MS/MS peptide fragmentation
  • Database search against a standard protein database
  • Results in electronic format, including the protein hits and supporting data
  • A free 100 fmol myoglobin system suitability run

Additional Work (will be charged at the project rate):

  • Searches for post translation modifications
  • Formatting a unique database, for example a genomic database for your species of interest
  • Searching for unique features
  • For digests other than trypsin the client may be asked to pay for the purchase of the enzyme; if the enzyme needs to be special ordered, delivery of results may be delayed

Protein ID does not include the following:

  • Detailed peptide mapping. Sequence coverage is reported, but if complete sequence coverage is your goal you might consider a peptide mapping project
  • Disulfide linkage characterization is not included in protein ID and would be performed as a project if requested